Hi I ve been in my flat over a year just first time taking door off to clean inner glass and and have this type of oven too never had this type of oven or integral so not familiar with it but I too can't fit gasket back into oven inner glass when I took it out of oven the gasket appeared to be attached to the glass too but i had to move them to get some grease of glass but quite a bit of grease on oven inner door i can't seem to screw the glass back into the glass how does the glass stay in place i can't do i put gasket in first then place glass over it also why do the screws not secure the glass to scared now to put it back as glass kept sliding down when i did bit worried also it says to put glass facing outward with low emissions glass which it says on glass i have is that outwards to wards looking out of oven or reverse looking into facing oven not sure any more worried glass will smash if not put back properly think oven is out of warranty got instruction book when took oven glass out gaskets were were attached, inwards not fitting the whole glass but only around inside it so do i put gasket in oven door first around edging then lay glass on top with it facing outward as i have low emissions glass and it says to do that then do I lay glass on tip but i found i can't screw to attach glass to stay secured now im frightened to turn cooker on and have not managed to clean inner door, where inner glass was too sticky around the screw areas i have cleaned the screw plates around it they cane up nice too greasy or glass to greasy( any tips on how to clean glass of thick sticky grease without scratching it as dont want to affect glass burnt dont want to scratch it) but not fitted around it so do they just stick on it said, in instruction booklet for oven not to move them in the instruction book but the soapy water moved them out of place does that mean i have broken it? any advice be helpful
Gemini
September 2019