Recent: LG FC930W Safe Mode: Unlock Front Buttons Without Remote

Mend > Washing Machines

Mend Hotpoint Aquarius Washing Machine Fault

Hotpoint Aquarius Washing Machine nightmare!?

My washing machine was plugged into a socket and it would suddenly stop working and everything else connected on that circuit would switch off too, i.e. The t.v., fridge, cooker.

I plugged it in a different socket not on the same circuit it worked for a few months and now it's stopped working again.

I have now plugged it in a different socket and its temperamental.

So does the problem lie with the machine or the electrics?

Thanks

Jack
October 2014
I have a mains circuit that behaves the way you describe - Fridge - Washing Machine - Tumble Dryer - Microwave - Boiler all buzzing away quite happily until we plug the iron in - then the fuse pops.

Add up the Wattage of each appliance - divide by the voltage - the result is the maximum current being drawn. Check it against the rating of the breaker.

You may have a circuit overload problem but you may also have an issue with your machine - how does it behave when it's on a lightly loaded circuit? What does temperamental mean? Sulky?

Good luck...

Igor
October 2014
We can check the main module (back of machine) for
£7.20 inc return post. www.emwelec.co.uk

Tony
October 2014
how many items do you have running at the same time on that circuit? you could be overloading it,but if its acting up on a differend socket, must be the machine, check out the power cable on it ,

j
October 2014

Related Questions ...

Mend washing machine Hotpoint fault
1

Door sensor Hotpoint WMXTF 742?

My washing machine Hotpoint WMXTF 742 is showing a F06 fault. I think the door sensor needs to be replaced. ... [Read more]
Mend washing machine pressure switch fault
1

how can i fix hotpoint wmd 940 ultima?

hi there i have a hotpoint wmd 940 ultima, my fault is i start the washing machine, when i come back to it,th... [Read more]
Mend hotpoint machine fails
3

How can I fix fault f05 on a Hotpoint wmf 1063?

My Hotpoint washing machine wmf 1063 p uk. It fails to empty and flashes fault Fo5. any ideas what is wrong ... [Read more]
Mend washing machine fault code hotpoint
2

F05 fault on Hotpoint Washing Machine?

My Hotpoint machine just shows F05 and wont do anything now. Any idea how to repair this ?
Mend washing machine fault lcd display
2

Fo9 fault showing on lcd display ,no function?

Hotpiont washing machine model wmd960 showing F09 fault ,control or selector buttons non functioning
Mend washing machine noisy spin cycle
1

Noisy on spin cycle?

Hi my Hotpoint BWM 129 washing machine has suddenly started making a very loud noise during the spin cycle the... [Read more]
Mend washing machine fault code repair
1

What is a f 05 fault on a hotpoint ultima washing machine?

What is a f 05 fault on hotpoint ultima washing machine
Mend hot washing machine
1

How can I fix hot point wmud823 washing machine?

Fault code F05 flashing
Mend washing machine Hotpoint f08
1

Fault F 08 - jj ow to fix hotpoint wd640?

Fault F 08 on my hotpoint aquarius wd640 washing machine. How to fix it?
Mend fault code washing machine filter
1

hotpoint 640 washing machine. f11 fault code showing ?

Cleaned filter, checked power to it, all plastic pipes clean of debris but washing machine is still showing f1... [Read more]
Mend washing machine fault code pump
1

Hotpoint Aquarius WF240P 1400 Spin - Not working - How can I fix it?

I have a Hotpoint WF2140P washing machine displaying a fault code which is Energy Save LED flashing slow, and ... [Read more]
Mend washing machine hotpoint repair
1

How to fix my washing machine?

My Hotpoint washing machine,model-Ultima. Model number:WT761flashes the fault H20.Could you please help?.
Mend washing machine fault code pump
1

How can i fix my hotpoint aqualtis xff 149pm?

my washing machine is currently displaying an F04 fault code. I think this is something to do with th pump. Ca... [Read more]
Mend washing machine fault Hotpoint
2

How do I fix an F08 fault ?

My Hotpoint washing machine has F-08 flashing on the digital display and of course now won't work.. What can w... [Read more]
Mend washing machine hotpoint fault
1

what is fault F3?

Hotpoint washing machine WF860

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...