Canon 10287G Timer fitting?

Just in case anyone else comes across this problem in future..

plug in the live(red) and nutral(blue) the same as the old programmer.. and just use one relay the top one as the programmer sits.. make sure the wires go the right way round as the old relay..ignore the lower relay and the other terminals..

Colin Andrews
July 2010

I found that removing the red wire from the PCB effectivly bypassed the timer allowing the oven to work a bit late for you but it could help others.

Stephen Benson
November 2008

I have the same problem. Anyone got a wiring diagram? This is the same as the Hotpoint 10287G

John
January 2007