How do I reattach the oven door to my belling DB1000E?

If there are 2 of you, you can fix it by taking the back off which is easier than the side... 1 person reach in from the back and position the bracket ( its not easy to reach but I have done it) 2nd person put 1 screw in bracket without the door hinge to pull bracket into place, enter a 2nd screw through the hinge to hold the plate whilst you take out the 1st screw again and enter it through the hinge, then fit all 3. cheers

Kenjo
July 2014

I have the same problem with my Belling cook centre. It seems that there is a loose plate inside the casing which the screws tighten into and it has moved. I fear that the side casing is going to have to come off now. Any other ideas?

Steve
July 2014