Melcom ST6000: I disconnect a sensor now a problem?
I disconnected one of the sensors on my Melcom ST6000 for decorating. When I reconnected it I get all zones flashing red, and none of the sensors do not blink as they used to. Any help please?
Problem solved. When I disconnected the wires from the detector, I had not powered the system down. So the power wires had made contact and shorted the power fuse within the box.
Hamid Agha
May 2014
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
