If your remote does not have a TV/Radio button then it would help to know the make and model of your receiver/recorder as different makes and models vary in their design.
As an example the Humax HDR-2000T does not have a TV/Radio button but can be changed to a radio channel by any of the following methods:
Method 1: While watchiing a channel press the OK button on the remote or press the LIST button on the remote. This will display a list of channels. Above this it will tell you (or remind you) which channel group you are currently in. Use the left and right buttons that are positioned beside the OK button to change the list to either a radio list or a favourite list if you have one set-up. Then use the up and down buttons positioned above and below the OK button to highlect the channel, followd by OK to select it..
Method 2: Press the guide button and select the current programme for the channel you want to watch or listen to. If the epg does not appear to contain the channel you want then use the blue button to select whether you want the epg to contain TV or radio or HDTV or favourite or recent channels.
Method 3: If you are already listening to a radio channel then you can just key in the freeview channel number for the radio station without having any of the menus displayed.
Method 4: Favourite lists can have a mix of radio, tv and data channels. Set one of these up and activite it. This will simplify methods 1 to 3 as the channel lists will be default to all channels you are interested in and you can use the direct the freeview channel number for the radio station.
Method 5: There is another method via the i button but it too relies on having a favourite list set-up or already being on a radio channel.
Susan
February 2014
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix dtt receivers.