Recent: Will I need to replace my garden tap?

Mend > Home Heating Systems

Mend Halstead HE30 Hot Water He30

hot water?

my halstesd ace he30 will not give me hot water, I don't get any codes coming up, no h's or nums just a solid or flashing C,my central heating works fine, can any advise, thanx

rebecca
November 2013
no hot water at all?
no recognition of hot water demand on boiler?
no fault codes?
best guess
DHW flow switch

Q
November 2013
SERVICE MODE:
The appliance enters the SERVICE mode by turning the control
knob to ‘SERVICE’ (full clockwise). The LED displays a flashing
‘C’. In this mode the appliance runs at the minimum CH output.
This mode allows the gas valve offset and CO2 emissions to be
measured. To increase the output to maximum turn the control
knob back on and return to Service within two seconds.

Patrick
November 2013

Automatic Answer

We may have found other answers which could help you.

Click here for Hot Water He30

Related Questions ...

Mend boiler heating hot water
1

No hot water on an ideal he30?

Hi I've got heating but hot water is not working properly Won't heat properly Boiler turns burner off very... [Read more]
Mend boiler heating pressure
2

halstead ace he 30 combi boiler?

boiler is working fine hot water and heating but goes over pressure blows off through pressure release valve. ... [Read more]
Mend combi boiler heating repair
2

How do I fix heating on Isar HE30 combi boiler?

The boiler is approx 4 yrs old. Both heating and water worked fine until recently when the heating has packed... [Read more]
Mend hot water pressure
1

Low hot water pressure from tap.potterton performer he30?

Hi .my hot water from my taps is very low .i have a potterton performa he30 .no foult lights .boiler cutting i... [Read more]
Mend heating boiler condenser
2

I have an ideal isar HE30 condenser boiler no heating?

for the past few days when i put the heating on the display on my boiler has a C where the status is and the b... [Read more]
Mend heating fault hot water
1

fault l8?

hi, i have aideal isar he30. the display is showing fault l8 which means fan error. when showering the water... [Read more]
Mend heating fault code repair
1

What is L9 fault on indesit isar he30?

Hot water stopped working and the falut L9 is flashing, any ideas what it is and roughly how much it wil cost ... [Read more]
Mend combi heating radiators
1

Isar HE30 combi boiler?

Have a problem with my boiler, its been ok for the three years I have had it, but lately when I have a shower ... [Read more]
Mend heating flame failure hot water
1

how can I fix my Isar HE30?

Hi,my three year old Isar HE30 (that has also been a real pain for three years) has today started making a ve... [Read more]
Mend combi boiler heating ideal isar he30
1

no radiators working?

ideal isar HE30 combi boiler, we have hot water but no radiators are heating up, tried reset button ,displays ... [Read more]
Mend boiler heating hot water
1

how can i fix?

ideal isar he30 boiler broke. no hot water. got power. flashing h e on screen
Mend heating pressure hot water
1

Filling loop on Isar HE30 boiler?

The pressure has fallen on my boiler to around 0.5- as yet no problems with hot water or heating but would lik... [Read more]
Mend isar he30 boiler problem
10

ISAR HE30 BOILER PROBLEM?

My 86 year old Mother had a Ideal HE30 Boiler fitted under the Warmfront scheme in July 2007, nearly 3 weeks a... [Read more]
Mend boiler heating combi
18

Problem with Ideal Isar HE30 combi boiler?

Our heating and hot water went off this evening. We checked the boiler and there was no illuminated display at... [Read more]
Mend heating boiler system failure
3

what is wrong with my boiler?

my boiler is 18 months old, model Isar HE30, everything has gone off. I have no heating or hot water, does th... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Heating Systems ...