Hello all Iam working at the inlaws house replacing old accenta with newer gen model.Problem!!, how can I stop the external sounder ringing for the duration of the change over?.
I have an understanding of circuits,low and mains voltages etc but is there anyway I can hold it off at the panel end rather than getting the ladders out?.
The sounder is located at the rear of the house above the conservatory so access is going to be tricky.I know I could let it ring but Iam concerned about the noise annoying the elderly neighbours.
The 9930's were 20 quid cheaper but as you know mate are now obsolete.Cooper not daft and what a brill answer from them to your inquiry :) :).
e manno
November 2013
I know exactly what you mean e manno,why have mince when you can have steak,as you know am a scanny man too,and as you know you can buy the complete panel with keypad cheaper than the keypad alone at one time I had six end stations in stock that we robbed the keypads from,i called scanny up and asked how can you justify this?guess what the reply was???????????????we don't need too,:-0
gts
November 2013
True mate :)
But if an istaller chooses the right supplier??.
The scanny 9651 with rkp is only £12.00 more then a gen4 and around the same for castles euro mini.
You know me mate I'm a scanny man and always will be,but I have to say that an additional rkp for the 9651 is expensive to buy from anywhere as a separate unit.
Besides an installer who knows his stuff would choose the FSL 9651 over the G4 ,12 quid???, FSL???, it's a no brainer,that's what I'm on about mate.
e manno
November 2013
cos its cheap tat mate and they can charge high price for it as you very well know !!!:-)users don't know any better
gts
November 2013
There's some great reliable end user friendly panels out there,so why on earth are installers fitting this Accenta/Optima rubbish?.
The veritas is also low end rubbish (sparks fav).
DIY tat in my opinion.
e manno
November 2013
true alarm guy
gts
November 2013
Severe lack of understanding methinks
Alarm
November 2013
you more or less gave him the answer mate,but he not know as much as he said he does,:-)or he would have picked it up
gts
November 2013
e manno,:-):-):-) guy has no clue no harm to him,
gts
November 2013
Nope.
Better use 1amp inline fuse on battery + wire just in case.
Can't believe you asked me that,and you say you understand circuits?,go round and inform the neighbours of your intentions and let it ring man.Probably most of the old dear's will be mutton jeff anyway.
Be safe.
e manno
November 2013
Thanks e manno and yes the gen is here waiting to go in.
Just can not stop! It ringing when we remove the wiring for the sounder that is all.
I have a understanding of what you are saying and does seem the easy alternative considering the access to the sounder,so we will give it a go.
No voltage through the TAMP right?.
Walt
November 2013
Use the battery from old panel.
Think about it!,can't say exactly what to do on here for obvious reasons but if the sounder retains it's voltages????.
I'd also suggest you relocate the sounder to a serviceable position or fit new sounder in better location,have you bought the gen yet?.
e manno
November 2013
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home alarm systems.