Mend Omnicron 6 Home Alarm Systems

Mend Security Systems, Home Alarm Systems

Find out how to mend it for free.

Ask Question

Click here to mend Omnicron 6 home alarm systems

Mend home alarm systems ...

Mend Home Alarm Systems

Mend > Home Alarm Systems

panel?

Hi there now before I start I have a feeling I could be lectured about the following ha

basically I have a A1 omnicron istalled at my works unit now I'm not willing to go down the road of buying a new system because I don't have anything that is that valuable in there anyway but basically someone shot the outside box about 6-7 years ago and it prettymuch killed the fuses in the panel but I have brought it back to life! fixed the bell box strobe sounder work fine along with the red l.e.d at the front, what I have done is set a code and I can't remember it but I have seen on here that if you power it down it resets this however hasn't worked is there another way?

jay
November 2013

Omnicron 6 Security Systems, Home Alarm Systems

jay to let you understand we are pros on this site,and we like to have a laugh,your panel is rubbish,no other way to say it,buy a good panel like a scantronic 9651 and fit a new 7 amp battery too

gts
November 2013

true e mannno,my bullets are far more expensive !

gts
November 2013

thanks for the reply's yes I will try 9999 and yes in about 2007 it got shot by some idiots in a window by pellets they shot the strobe as well But ive replaced it now and its been quite fine for the last 18 years or something

Jay
November 2013

Not worth the price of a cartrage gts,besides it's long past it's self destruct day :)

It's written in the stars for these jobbies.

One mains spike should kill it for good :D

e manno
November 2013

they should have shot the panel too ! :-) :-)

gts
November 2013

Manufactured by ADE by the way :)

e manno
November 2013

Shot the sounder?.

There's several omnicrom models one of which is a wireless jobbie.

The early omnicroms simply used key presses for a factory default,
Eg enter engineers code then hit the zero key.

The factory engineering default code is 9999 if that helps,but chances are it's been changed and probably not running on programming defaults.

Can't give you a link for the engineering books, so try the net because you will need one for instructing you how to default user/engineering codes and also for programming.

e manno
November 2013