1 hour ago: Will I need to replace my garden tap?

Mend > Printers

Mend Power 10 Seconds

When I hold the Power, Maintenance and Stop buttons down for 10 seconds the?

When I hold the Power, Maintenance and Stop buttons down for 10 seconds the machines ink cartridge holder gears squeal and grind and the machine shuts down. I think something has gotten into the machine and I don't know how to open it to check/remove it without breaking something on the housing.

Chris
May 2013
Sorry Peccavi
It's an Epson Stylus Photo R320. I have checked everywhere inside I can see for paper scraps and found none. I am going to have to take the machine apart to fine what is jamming the mechanism. Believe it is paper scrap or something has fallen into the paper tray and was pulled into the print cartridge park side and jamming the gears. I don't know how to get the housing apart without force and don't want to trash the machine trying to fix it. Is there a manual available or a site I might find that has instructions on taking this R320 apart? I have found a few sites and sent paypal funds to pay for a manual and received nothing so far. The manual was to be sent as a PDF file upon receiving payment. Live and learn.

Chris
May 2013
It often helps to say the make model.
And why are you holding down the three control buttons - to achieve what?

The usual problem with printers is a paper jam - to clear jams it's usually necessary to open the covers - you tube has videos of some printers.

Good luck...

Peccavi
May 2013

Automatic Answer

We may have found other answers which could help you.

Click here for Power 10 Seconds

Related Questions ...

Mend dishwasher cycle drain
1

Kenmore Quiet Guard 1 cycle problems?

Usually when you start this machine, you need to choose the cycle and then press start. Now when I push the "... [Read more]
Mend scantronic alarm house
3

Scantronic 9200 alarm?

I have the scantronic 9200 alarm in my house, worked perfectly fine until today - usually it has a light on th... [Read more]
Mend cuts running engine
1

My DB50QT-11 won't accelerate and cuts out after 20 seconds of running?

I have recently swapped the engine in my db50qt11 and now the engine will not gain revs and cuts out every 10 ... [Read more]
Mend runs 10 stops
2

Power Devil Jig Saw?

Hi , I have a Power Devil Jig saw Model PDX2JSB which runs for 10 seconds and then stops. Does anyone know how... [Read more]
Mend selectronic redring shower
1

selectronic redring shower?

My shower begins to power up and after approx 10 seconds it shuts down completely any ideas guys plz
Mend washing machine no start water valve
1

My Hoover HNL2126 1200RPM will not start?

9 years old. power is connected and when a programme is selected and the start button pressed, a whurring nois... [Read more]
Mend working fine plug
1

Vax 2000 no power?

I have a vax 2000 which was working fine till the other day the wire came loose in the plug which I fixed plug... [Read more]
Mend power steam elite
1

Power keeps turning off after10-15 seconds?

My Morphy Richards power steam elite has just developed a problem, it turns it self off after about 10-15 seco... [Read more]
Mend loss sudden loss loss
1

Jaguar x-type sport?

The car loses power suddenly and randomly for 10-20 seconds then power returns.
Mend boiler fault heating
2

Suprima 50 HE No lights unless Gas Valve disconnected?

Hi, I have a Suprima 50 HE boiler that decided to stop working yesterday. When I got to it, all 3 lights w... [Read more]
Mend 10 seconds shuts
3

Power 10 set for 3 min runs for 3 seconds and shuts down?

set at power 10 set for 3min. runs for 2 seconds and shuts down
Mend problem starts fine sudden
2

My beko 6kg has got serious problem, it starts for 1 sec and stops then?

It has been working fine and all of a sudden it has got some malfunction. It starts with full spin and stop... [Read more]
Mend switch 10 power
1

what will cause my DMTECH wt20xt television to switch on and off?

what will cause my DMTECH wt 20xt television to switch itself on and off every 10 seconds as soon as the main ... [Read more]
Mend boiler PCB heating
1

Halstead Ace High PCB?

the boiler ignites but only stays on for 10 seconds then cuts out for both heating and water. The power light ... [Read more]
Mend help unable test
6

9200 series?

Help needed please unable to set alarm the bell test internal works but not the external the walk test work... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Printers ...