01 frod transit 2 litre diesel?

push the buttons on each balljoint at the g/box to release,at the mount for the cables there should be a black plastic shroud which when you give it a half turn lifts the locking pins from the bracket enabling the cables to be released,same at the gear lever.two 10mm nuts on the floor plate and the cables should come out,take note of the route they come out at.On one of the cables,g/box end there is an adjustment,if you look at the old cables take note of the measurement and if the new cable is adjusted quite close to that then you shouldn`t have any problems,good luck.

cdc
April 2013