Recent: Safely remove screen protector from a Macbook Air?

Mend > Home Heating Systems

Mend Ideal Logic Combi 30 Boiler Pressure Radiators

error code f1 ideal logic combi 30?

Hi, I have an Ideal Logic combi 30 which is showing the F1 errror code. The pressure is showing as fine (between 1.5 and 2) and I have bled all the radiators. Does anyone know what could be wrong? Many thanks Zoe

Zoe Cartwright
March 2013
Ideal logic F1 error - presure is between 1 and 1.5 bar and all radiator valves are open and system has been vented, low pressure senser on the top of the pump assembly the connections could be loose or faulty needs to be replaced, new pressure senser.

Rory Thomas, gas safe engineer
December 2015

Automatic Answer

We may have found other answers which could help you.

Click here for Boiler Pressure Radiators

Related Questions ...

Mend boiler pressure radiators
1

over pressure?

I have a greenstar 24i boiler, pressure is normal, when I turn heating on pressure increases and eventually op... [Read more]
Mend heating boiler radiator
1

Problem with the pressure in combi boiler?

My valent combi boiler has problem with the pressure which keeps on falling which causes the radiator not to h... [Read more]
Mend boiler radiators pressure
2

I only have heating downstairs... ?

Hi all. My heating has been a bit funny. The radiators upstairs aren't heating up at all and the ones downstai... [Read more]
Mend boiler heating pressure
1

how to reduce boiler pressure ?

i have set the bar pressure on my greenstar 37 cdi to high. how do I reduce it to proper level. Do I use the k... [Read more]
Mend pressure worcester heat
1

Faulty Worscester 35 CDi loosing pressure?

My Worcester 35cdi has had 4 replacement heat exchanger's in less than 10 years the first 2 were within the fi... [Read more]
Mend boiler heating radiators
1

How do I raise the pressure on my boiler after bleeding radiators?

How do I raise the pressure on my worcester heatslave 20- 25 oil boiler after I have bled the radiators
Mend boiler heating thermostat
1

combi oil Worcester greenstar heatslave 12/18 switches off?

I have a internal combi oil Worcester greenstar heatslave 12/18 Its has a built programmer and Hot water t... [Read more]
Mend heating pressure radiators
1

how can i lower the pressure in boiler ECLIPSE 216 ESS please ???? ?

my radiators are old and have the draining valve at the back of each of them so access is ni on impossible;[ ... [Read more]
Mend combi boiler pressure pilot
1

Worcester combi boiler has lost pressure after bleeding radiators?

I bled radiators now digital pilot light off and pressure gauge on zero. Help please!
Mend combi boiler pressure pump fault
1

Baxi combi will not restart after changing radiator?

I have a Baxi combi 105E boiler and have fitted a new towel radiator.after refilling system (all radiators ha... [Read more]
Mend heating radiators boiler
2

How do I stop water from flowing outside from my ferroli optima 901 boiler?

Pressure bar is constantly at 3. If I drain radiators, pressure reduces but then creeps back up again. I have ... [Read more]
Mend boiler heating pressure
2

how to pressure boiler after bleeding radiators?

we have bleed the radiators and the pressure has dropped how can we re-pressurise
Mend boiler 28 pressure
1

Remeha avanta boiler 28 - help???

Hi I have just had my boiler serviced in November and since , it keeps losing pressure down to 0 everyday, tod... [Read more]
Mend low pressure heating system
1

low pressure on heating system?

my boiler will not allow me to pressurise the radiators to the correct pressure even though the mains pressur... [Read more]
Mend boiler heating fault code
1

How can I get my water and heating to work?

I have a ideal logic combi 24 boiler with a fault showing code f1, I know this is the pressure, I've turned va... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Heating Systems ...