wot up with my machine?

it may well be the bearings on the washer or even the bearings on the motor itself. disconnect the mains supply by removing the plug from the wall, take the back off the machine, take off the belt and see if the drum will turn, also see if the motor spindle turns. There will be a reason why your belt came off in the first place.if the drum will not turn then it is more than likely bearings,the same with the motor. If both of these turn check the inside of the belt itself and see if it is crackrd or if the vees are broken

silverfox517
March 2013

sounds like the bearings have collapsed and drum jammed up

le
March 2013

can you move the inner drum by hand?.Has belt snagged wiring causing short?

CK
March 2013