Recent: Safely remove screen protector from a Macbook Air?

Mend > Lighting

Mend Fitted Time Reason

Transformer?

I have just fitted a new transformer but after a period of time the lights fade is there a reason why?

Mandy hill
February 2013
also check that there is no insolation covring the transformer as this will cause it to over heat its better to fit a transformer a bit over what you need,i.e if you fit 3 20 watt bulbs,that would norm be a 60 trans former,but i would reconmend a 150 watt transformer,becaue i have found lots of folk just go buy a buld and not ask for the wattage

mm
February 2013
Transformer rating (watts output) unsufficient for the wattage rating of the bulbs.
eg. If you have 3x20 watt halogen bulbs then the transformer should not be less than 60 watts

GB in Wales
February 2013

Automatic Answer

We may have found other answers which could help you.

Click here for Fitted Time Reason

Related Questions ...

Mend sensors system fault
1

Alarm keeps going off every few minutes?

I have the 9495A and its been faultless for a long time now for some reason I cant reset it. If I just enter ... [Read more]
Mend temperature pressure sensor
3

Boiler Hot water intermittently losing temp, Heating seems fine?

The title explains the main issue, for some reason the hot water drops often every 20 secs or so, sometimes it... [Read more]
Mend time sensor changed
1

02 T260 ford transit cutting out..!?

I have a 02 T260 transit that can cut out at any time. Flywheel sensor changed new relay fitted but did not so... [Read more]
Mend shower quadrant enclosure
1

Has anyone experienced their shower door shattering?

I have a Quadrant shower enclosure which was fitted 6 months ago. In the early hours of the morning one of the... [Read more]
Mend security programming system
2

how to part programme Accenta Gen 4?

I have fitted Accenta Gen 4 alarm [lcd keypad], As per instructions, I tried to set up Progamme 3. where you c... [Read more]
Mend heating heat sensor burner
4

Glow-worm micron 60ff flashing lights?

Fitted this micron 60ff myself 7 years ago . 2 months ago I change pcb and heat sensor on boiler because the f... [Read more]
Mend bought car system
1

What could be the reason?

I just bought 2002 model Rover 45 car and also bought an navigation system (TomTom). When I fitted TomTom and ... [Read more]
Mend veritas alarm fitted
3

Veritas 8 burglar alarm - alarm goes off randomly ?

Had the Veritas 8 burglar alarm fitted few years ago, but over recent months the alarm will go off in middle o... [Read more]
Mend electrics power fault
7

Why do my electrics trip?

The main switch on my RCD trips without any obvious reason. Here is the basic background. It usually happens ... [Read more]
Mend How to mend it?
1

zanissi jet,sys 1000 RSI?

Hi Ihave a Zanussi jet system RSI washing machine just fitted a new pump but now for some reason its leaving w... [Read more]
Mend burner ignition pcb
1

why does my main burner keep constantly lighting and going out?

Hi I have a baxi solo wm 40/pf bolier which keeps constantly igniting then going out. The pilot is lit and the... [Read more]
Mend 2000 help years
1

Vauxhall vectra 2Lt. (2000). Alarm problems?

Hi, Can anyone help please? I have owned my vectra for 2 years without a problem. Over the last week the facto... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Lighting ...