Switch ignition off.
- Press trip recorder reset button below speedometer on the instrument cluster at same time switch ignition on.
The trip recorder display (odometer) will read "service OIL".
- Release button.
- Pull the clock adjuster button (below tachometer) on the instrument cluster and hold for approximately two seconds. This resets "service OIL" display.
Note: Depending on the make of the instrument cluster, the display on the trip recorder will either continue to read "service OIL" (Nippon Seiki) or change to "- - -" (VDO).
- Press trip recorder reset button again to advance to next type of service.
- Release button.
The trip recorder display will read "service INSP".
- Pull the clock adjuster button on instrument cluster and hold for again approximately two seconds. This resets "service INSP" display.
(see previous note depending on display)
- Switch ignition off.
Hope this helps
scott
November 2006