Hi. i have a 2007 model Pug speedfight 2 and the immobiliser has gone it flashes twice and then stays on. and ive took the bike bits and removed the cdi/immobiliser and on the box it says ACI 100.02 would it be fine to replace with a bypass which is a ACI 100.01 instead of 100.02? ive searched for the 02 one on ebay but nothing comes up... Thanks
no on and off switch is euro 4 specification, hence automatic lights, ghech the multiplug loom coming off your headlamp, into the loom, more than likely you have a bad connection in the multiplug , to the cluster earth
m
March 2013
thanks mate ive done it now, got the bike running. But now i have another problem, my brake light and indicators are working but none of the lights that run off the engine. e.g front lights, rear lights and also the lights on my speedo. i have replaced the rectifier and took the stator plate off and checked it. the stator plate is fine, please note my bike dont have an off and on switch for the lights... any idea's? thanks
Nathan
February 2013
the aci 100 is the one you want, ignore the 02 it means something else which i wont tell you but the trust me aci 100 unit is the one, available from adrenalin pedstop or electrex(the company that makes bypass boxes)
howtomendit.com for free repair help, information and advice.
