wires?

Are these wires in a loop with the fuse in the middle? is the fuse ok?, have you tested it?. double check the wires into the board. Im not familiar with these machines this is a generic answer. Try turning the machine on and off to reset the board. Does it need to be programmed if the batteries have been removed any memory will have been lost.

Mark
November 2012

Mains wires?, Brown is live and blue is neutral. Earth is green. Otherwise look at the other side of the plug and check the colour coding

Mark
November 2012

Its two wee red things, the one that has a brown and a white, says fuse on one side so I assume that's the one the brown goes in, anyway tried that ,new batteries ,machine runs but display shows 00 ,no speed etc, but speed works, incline works, just no readings . It's on my proform 6.75q treadmill, google brought me to this page, Keith tattoo ,n.Ireland

keithtattoo
November 2012