remove grill - remove rubber cap
to remove bulb holder use string warped round the cables to bulb, and keep the wires taught (don't pull hard!)
Using other hand reach inside and feel the two plastic clips that hold the build holder in place. Press in and wiggle the holder while keeping the wires taught....
(I used a cable tie not string)
Just push back in place
Mcbjs
December 2015
You need to remove the 4 plastic securing tabs that hold the front grill in place then bend it forward.
This gives access to the sidelight chamber on the light units, remove the rubber cap then simply pull the lamp holder out.
Replace the bulb and refit (take care not to let go of the lamp holder as it will drop into the bottom of the headlamp unit...)
Put the grill back into place and press down the 4 lock tabs.
Richard Hulme
August 2015
Automatic Answer
We may have found other answers which could help you.