Scantronic 9751 - faulty?

I have fitted scanny for 15 years. They will always exchange faulty equipment beven when out of warranty. Your installer is ripping you off.

gtm
August 2012

nah u got it wrong alarm guy,with them,its 30 k,first,then change bits till you get it working,:-)

gts
August 2012

You have hit the nail on the head gts,i agree with you totally, you have picked up on my point here " installers not engineers".

Our senior engineers are old skool and if they say the panels faulty it is, the young uns ring us oldies asking advice, that's ok it all comes down to experience.

e manno
August 2012

but am like you,old school,we check for cause of faults,not just change bits,sadly the young guys these days go for quick fix,change this change that,you know what am talking about,i would hesitate to call them engineers,if you think am wrong,tell me

gts
August 2012

yup alarm guy,i agree

gts
August 2012

Any engineer worth his salt would have checked from induced AC.

Alarm
August 2012

and to let you guys know how good scantronic are, if we fit one of their units and its faulty,they replace it,and give us a free panel to cover our costs,no other manufacturer do this .so,that is why we stick with them,we have fitted over a thousand of the 9800,and a like number of 9751,and a lot of the 9448 units,we will stick with scanny.

gts
August 2012

we fit them as standard e manno,its just sence to do it

gts
August 2012

Maybe these panels are not faulty ?,

Intermittent faults like the one's described ,can be linked to induced ~AC~.Even if these systems were installed professionally, spikes can cause issues.

How many systems do you guys recall working on that haven't had a suppressor fitted, either as standard or a pre fix ?,

Us electricians know how to test for induced ~ , and we also know that most meters won't register a reading, gts got me thinking here when he suggested this engineer was a component changer.

Wonder if these panels had these four quid filters fitted?

e manno
August 2012

"Installed a 9751 but 9 weeks later it would not disarm. Operator error I thought. 5 months later same problem so replaced touch pad. Nearly a year later same problem. Replaced 9751 without charge and received a refund from Scantronic supplier. Problem solved. Your installer probably received a refund as well as charging you. Had similar problem with a 9651 unit."

DIY or Pro fitting?

Alarm
August 2012

Installed a 9751 but 9 weeks later it would not disarm. Operator error I thought. 5 months later same problem so replaced touch pad. Nearly a year later same problem. Replaced 9751 without charge and received a refund from Scantronic supplier. Problem solved. Your installer probably received a refund as well as charging you. Had similar problem with a 9651 unit.

Danny
August 2012

sale of goods act 1976 states the goods must be fit for purpose,if they have been out to see the panel and you are still getting the same prob,its called an on going fault,it does not matter if the guarantee is out,they failed to fix the fault,its their prob,not yours,if you dont beleive me,either print it out,or,get them back to fleece you again,

gts
August 2012

Nope, they have not fixed the fault.
There is something the so called engineer is missing. Ask for their senior engineer or a manufacturers rep to be present next time.

Also check the EU rules on warranties for electrical goods.

Alarm
August 2012

i suggest you print it out and stick it in their face ,if you have what is know as an ongoing fault,i e ,they cant fix it,then its their prob,do not buy new unit,if the engineer could not find the fault,tough,he sounds like a cmponet changer to me,not an engineer stick to your guns,reprt them to trading standards

gts
August 2012

See if the log can help,

Pop your code in and press 5, what is displayed?,

See if the log has recorded these false alarms, and see if it points to a particular zone.

e manno
August 2012

sorry acorn,how could i be sooo stupid,

gts
August 2012

Now, come on, don't ask complicated questions :-))

acorn
August 2012

when this happend ,what did the key pad say

gts
August 2012

your alarm installer is wrong,if you have an ongoing fault,its their prob,check out the sale of goods act

gts
August 2012