Kenmore powermate model 116 51513000 - broken belt?

It looks as though the light cover is not a sepprate piece from the rest of the top. Once you just push on each side of the light cover it pops off. There are the screws...ect.

Maggie
August 2013

i just pryed up where light was and two screws were there and simple as that the belt was changed

db
March 2009

Go to Sears web site. Eventually it will lead you to a link similar to this one.

http://www.managemyhome.com/mmh/products/ManualSearch.action?sid=MMHMxSearsx00019&product.modelNumber=11622513201&product.brandName=KENMORE

The canister vacuum cleaners are all similar in design. The manual for one may work well for the others.

Laer Carroll
December 2008

If yours is like mine, then you first need to pry off the cover over the light on the top of the powermate unit. Under that cover are the philips screws you need to remove. Once they are removed, turn the unit over and use a flat screwdriver to loosen the clips on either side (they should be marked). When the bottom cover is unclipped on both sides you can pull it off, exposing the the brush and belt. The new belt I bought yesterday cost $5, and they seem to be common at vacuum stores (most likely because they break often!)

Alice
July 2008

Replacing the belt is fairly easy. There are a couple of philips screws that you get at by turning the head upside down. Remove those screws. The rest of the head cover is held on by clips that are molded into the top half cover. Pry each of these gently with a screwdiver and the top cover should come off.

Jesse
December 2007

Did you have any luck? I, too, have misplaced my owners manual and am having no luck with finding out how to replace the belt myself. It seems the only way to fix this vacuum is to replace it with another brand, which seems to be a lot more affordable than taking a basically brand new machine to have it fixed by Sears.

Peabody
May 2007