My Ultimate 2 make a clicking sound when it is agitating. Sometimes it is unbalance and starts walking really bad! What parts do I need to replace in the agitator assembly? Its about 10 yrs old? Thanks
I replace the dog ears for the agitator. This took care of the clicking sound. Now I pull the pump off and pull the motor out and there is another coupler attach to it. The black ring seem to be worn. I also remove the c-clip and remove the clutch which has a plastic piece attach to work inside the clutch housing. This had a broken bead on one end of it. I will replace this and the black transmission coupler which is probably the bang sound that I'm getting at the end of the spin cycle.
Dean
June 2008
I replace the dog ears for the agitator. This took care of the clicking sound. Now I pull the pump off and pull the motor out and there is another coupler attach to it. The black ring seem to be worn. I also remove the c-clip and remove the clutch which has a plastic piece attach to work inside the clutch housing. This had a broken bead on one end of it. I will replace this and the black transmission coupler which is probably the bang sound that I'm getting at the end of the spin cycle.
Dean
June 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
