Peugeot speed fight?

i had the same problem with my speedfight 2 50cc Air.
I added on a Leo Vince ZX Racing pipe and bought new clutch rollers.

Boothy
April 2007

hi! you probably have put on heavy rollers. try a combination of 3 (6g) and 3 (7g). But don't go with a difference of more than 2g because you will have two variying acceleration, one quick then top comes slow. you can also use smaller rollers but it has to have the same diameter as the original fitment to give you more ratio on the bottom end. check for any leaks in the gaskets of the barrel or any thing that may clog the ports (i.e. excexx gasket sealants)

kris urian
November 2006

i would suggest the wrong belt has been fitted or the variator rollers are jammed up to make it pull away slow but this would not make the clutch seem to be slipping rollers are common to twist on their sides and cause the gear ratio to be to high to get good acceleration ok.

adam bike doctor
October 2006