Recent: Home max fs506x?

Mend > Vacuum Cleaners

Mend Kenmore 116-53612300 Replace Belt Cleaner

How do I replace the belt in the floor cleaner?

I have a Kenmore Canister Vacuum Cleaner model # 116-53612300 and need to replace the belt. I took out the 2 screws but cannot open the powermate and do not know how to replace the belt that I have already purchased.

I need to know how to open the powermate and how to replace the belt.

Susan Willner
October 2006
From another post:

1. Remove the light bulb cover (just pulls off from pressing the sides in)
2. Remove the 2 long phillips screws in the center
3. Grab edge of the cosmetic cover from underneath and pull outward and upward to lift off of the black base. Now you can work on the brush roller and belt. If you have never changed the belt, the cover may be stubborn.

If you need any more help or parts, my email is arctic@worldlynx.net

Squall
March 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Replace Belt Cleaner

Related Questions ...

Mend belt brush roller
1

how can i replace the rubber belt on panasonic mc-e455 vacuum cleaner?

how do i replace the rubber belt that drives the brush roller on panasonic mc-e455 vac cleaner?
Mend vacuum cleaner drive belt dyson
1

Replace the drive belt for the brush roller?

We have a Dyson DC01 cleaner and the brushes do not turn when switched on. I suspect the belt may have broken... [Read more]
Mend replace belt cleaner
1

how do I replace the belt on my dyson upright animal cleaner?

I have bought a new clutch to motor belt for my dyson animal upright cleaner but their are no instructions as ... [Read more]
Mend kenmore burning smell
1

Kenmore Vaccuum Repair--Burning Smell?

I have a Kenmore Progressive w/ Direct Drive vacuum cleaner that whenever used, there is a "burning" smell. Co... [Read more]
Mend replace vacuum cleaner
2

How do you replace the brush belt for the Bissell 5770 H vacuum cleaner? ?

How do you replace the brush belt for the Bissell 5770 H vacuum cleaner? Thanks.
Mend replace upright vacuum
1

how to replace a belt?

How do I replace my belt on my upright Singer vacuum cleaner model # SB12680R, 6.8 amps
Mend belt vacuum cleaner
1

how do i replace the belt on a vorwerk 340?

how do i take off and replace the drive belt on a Vorwerk 340 vacuum cleaner
Mend replace fan belt
1

how do i replace broken fan belt on dc04vacuum cleaner?

how do i replace broken fan belt on dc04vacuum cleaner
Mend hoover need belt
1

Hoover Mach 3.3 need to replace belt?

I have a Hoover Mach 3.3 vacuum cleaner, the belt is broken and I've taken it a part but I don't see where I a... [Read more]
Mend dyson vacuum repair
1

how to repair dyson vacuums?

how do I replace a belt on a dyson vacuum cleaner
Mend pump checked belt
1

Bissell steam cleaner will not spray, Is it the Pump?

My Bissell Carpet Steam cleaner wil not spray. I have checked the belt, the filters, may sure the tank was fu... [Read more]
Mend motor repair fault
1

Is there a known fault that switches my Vax V-060 off?

My Vax V-060 vaccuum cleaner switches itself off after about 5 minutes use. It will not switch back on again b... [Read more]
Mend belt vacuum replace model
1

how do I replace the vacuumm cleaner belt on electrolux Md.4702?

How do I replace the belt on the electrolux model 4702 vacuumm
Mend vacuum cleaner belt
11

how do I open my kenmore vacuum model 116 31312100 to replace the?

how do I open my upright kenmore vacuum cleaner model number 116 31312100 to replace the belt?
Mend replace belt kenmore vacuum cleaner
1

How do I replace a belt on my kenmore vacuum cleaner?

How do I replace the belt on my kenmore model 116.39159990 vacuum cleaner( belt replacement no. 20-5275)? The ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Vacuum Cleaners ...