Recent: Will I need to replace my garden tap?

Mend > Washing Machines

Mend Fault Code Washing Machine Error

shows fault code e40?

washing machine stopped and fault code e40 showed up

stuart wake
March 2012
Release door rubber from cabinet front to gain access to door lock.held with 2 screws.if it has a brown mark in the centre be aware that it might of damage the pcb as this is a common occurrence when the door locks fail unfortunately!

ck
March 2012
door lock either not closed properly or faulty door lock.remove 2 screws at back holding top cover and slide top backwards and up to remove.door latch normally can be reach from top and is hold in place by 2 screws from door side

jj
March 2012

Automatic Answer

We may have found other answers which could help you.

Click here for Fault Code Washing Machine Error

Related Questions ...

Mend washing machine error code repair
1

aeg lavamat turbo 16810 error code e90?

aeg lavamat turbo 16810 washing machine has error code e90,what does this refer to and how do I repair fault
Mend fault washing machine
1

Candy evo 8163d fault code e09?

My washing machine is coming up with error e09? Does anyone know what this means or how I can fix it? Thanks
Mend washing machine error code siemens
1

What is error F63 on my washing machine?

I have a Siemens washing machine which is flashing the code F63. What is the fault?
Mend washing machine fault message error code
1

anyone know how to override door message on baumatic washing machine?

Model no BTWM5 baumatic washing machine fault message about door and want to override it. error code f04.
Mend washing machine error code electrolux
1

fault code e-40 on a electrolux ewg1444w?

washing machine stopped during a cycle and displayed error code e-40
Mend washing machine repair error code
1

fault to Zanussi washing machine ZWF 1430?

I suspect water heater is not working. would this show up as an error code? How do I make necessary repairs ?
Mend f05 hotpoint washing
1

F05 error code of Hotpoint wasing machine?

Hotpoint 960 washing machine has F05 fault again, managed to get it to do a spin to release water and then che... [Read more]
Mend washing machine error code motor brushes
1

aeg lavamat 6555 error code F9?

I have an aeg washing machine model 6555 displaying the error code F9 at the end. Has anyone come across this ... [Read more]
Mend zanussi washing machine code
1

Zanussi 1200 ?

The washing machine is frozen only flashing error code E 60. Does anyone have any ideas what this fault means?
Mend washing machine fault code repair
1

Hotpoint Ultima WMD960G + Fault F10?

Hotpoint WMD960G stops part through a wash and displays fault/error code "F:10". Power cycling removes the fau... [Read more]
Mend washing machine error code repair
1

I have a new neff washing machine with an error code F26 what is it ?

Ihave just purchased a new Neff washing machine.It refuses to work displaying error code F26.What is the fault... [Read more]
Mend washing machine error code drain filter
1

What's a Zanussi washing machine E20 fault?

Originally I had a E40 fault and the machine would not start the spin cycle. I drained the machine using the e... [Read more]
Mend washing machine working
2

Bosch Logixx 8 Washing Machine?

Stopped working and shows F18 error code. What is fault F18, The house is under renovation and I am unsure as ... [Read more]
Mend washing machine error code fault
2

Hotpoint Aquarius WF321G Washing Machine,lights flashing at end of cycle?

Hi, this just happened this morning, after end of cycle, the 'on/off' and 'wash enhance' lights started flashi... [Read more]
Mend hotpoint washing machine
1

Fault code F18 for Hotpoint LCD EVO2 and V4 Washing Machine?

what can i do to fix this error code myself?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...