I have a Rowenta Powerglide 2. It has a swivel cord and I am reasonably certain that is where the problem is. It suddenly quit heating. If I jiggle the cord it will heat up until the cord moves. It has not been dropped or abused. I am the only one who has used it. I iron daily - it has had a lot of use.
Betty Knapp ashgrove723@sbcglobal.net
October 2006
Sending your iron for repair is always possible, though expensive. It might be more cost effective to just replace it.
However, if the iron seems intermittent, especially when you move the power cord, it's very likely one or two of the copper braids is broken inside the insulator, precisely at the point where it bends coming in the iron.
I have repaired a few of these irons, and it's a simple repair; the real problem is having the safety torx bit needed to remove the screws holding the heel cover.
After opening the iron, just remove the AC power cord leads, cut out the power cord an inch or so away from the bending point and reconnect the leads.
Carlos
November 2006
I took a Rowenta DE871B in to my local appliance repair shop. He said there are no repair parts available and that they are basically a throw away item. It seems a shame since they appear to be well built. All mine needs are few seals to stop it from leaking.
George Hoke
October 2006
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix steam irons.