Mend Beko Washing Machines

Mend Household Appliances, Washing Machines

Find out how to mend it for free.

Ask Question

Find out how to mend Beko washing machines

Mend washing machines ...

Mend Washing Machines

Mend > Washing Machines

Beko 5120s motor changed now not working?

My beko kept shorting out the electrics in my house, I disconnected everything in it and one by connected everything back up. When the motor was reconnected the machine tripped out the electrics again so I ordered a new motor and fitted it. Now the machine starts, fills up with water then spins for a couple of seconds, bangs and then drains and turns off. I have tried a few programs with the machine empty and with items in and still the same. Any ideas? Did I need to do something to the motor before fitting it or have I got another problem or need to reset it and if so how?

Alex
March 2012

Beko Household Appliances, Washing Machines Beko Motor Working

Thanks. I have taken the board out and everything is labeled, what is the triac labeled as? Is it labeled as TC201 and look like http://www.hiwtc.com/products/bt137-triac-590089-2576.htm this?
I have also taken the belt off and Set the machine on spin, the motor spins for 2 seconds and then stops, 2 seconds again and then the machine turns off.

Alex
March 2012

There is a triac on the main pcb behind the fascia.This controls the motor.if it spins the motor flat out for a few seconds then stops it usually indication that the triac has blown.If your good with a soldering iron you can replace the triac.Only 3 solder joints and a heat sink mounting otherwise you will need a new pcb.Maplins should be able to source triac or an equivalent otherwise find a supply on the WWW.

ck
March 2012