best way of flushing rad is to remove it and flush it from bottom of rad to the top,use a hose and cleanig agent
mm
January 2012
why,,,wee need more info,,has it got contaminated,,liquid non bio wash will shift oil from rad,,,is it over heating..rocam enjin or endura type_top most part of enjin is it plastic or tin with endura e on it,,,,is it cos ya heater not working-pos heater control valve(were pipes go of into car) hope this helps not confuses,,
steve
January 2012
you may want to use a coolant system flush and run the motor for a couple of days,drain and refill with a/freeze mix,if any doubt if it is still blocked just replace it,don`t take any chances.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cars.