what is the erro e10?

E10 is a water fill time out error code.If the fault was during the wash cycle it could be an inlet valve,kinked inlet hose,water switched off,a leak or the water is syphoning due to the waste hose being pushed to far down the waste pipe
E10 during the dryer cycle could be a blocked condenser.kinked hose,water switched off or the dryer inlet valve open circuit.should be around 4kohms on all the inlet valves

ck
October 2011

did the error code appear during the dry cycle ?e10 is related to water pressure ,in the washer is a duel coil solenoid ,its purpose is to let water into the washer ,it also opens on the dry cycle .

mech monster
October 2011