I've had the same problem with the grill flame going out and the oven too.
I noticed the fan not kicking in immediately so I tried replacing the motor fan at the back but same problem. I replaced the circuit board at the bottom behind the back panel and that has solved the problem. circuit board controls the fan keeping grill and oven cool therefore flame safety device does not need to kick in i guess and knock off the flame. both parts available from espares website. try circuit board first.
be careful taking off back panel. fan attached to that.
as a helpful tip take picture on your phone of the wiring on circuit board so as you know where to replace them.
only 5 on circuit board and two on fan.
only took 15 mins total
visitor
October 2011