The belt seems fine, the pump is working and there is alot of black residue around the brushes. Are the bushes likely to be the culprit, and if so does anyone know where to buy them from?
lay the machine on its back ONLY
from the underneath you will see the motor.remove the brushes mounted to the side of the motor casing.if the carbon bit is 10mm or less they need replacing.to quick test you can stretch the old brushes and put them back on the motor and test.DO NOT USE LIKE THIS as it could cause motor damage.Brushes are available online or any domestic appliance repair centre should be able to get you some
ck
August 2011
try one of the ads on here or your local shup or just about any online store or Ebay
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.