how to repair stannah 260 staiflift flashin fault code?

hi,,,,,led 2 on the main pcb means there is a volt drop on the lift....to test the main carriage batteries correctley is switch the isolator switch off on front of carriage then remove side cover to main pcb,,at the top of the pcb you will see red and black spade connectors which should be for your battery ,,test this with your volt meter to confirm this.....then secure the leads to these spade connectors ,,,swicth the isolator back on on front of carriage and run the stairlift up and hopefully you will see the voltage drop anything below a 3 to 4 volt drop will stop the stairlift.............regards ian,,,portsmouth/uk

IAN
July 2011