since decorating when i moved 2 sensors my system will not set (all 6 zone leds are on), none of the sensors are detecting movement. Does the system need to be reset?
thanks for the advice I checked the glass fuses and found the one labelled "speaker" had blown. the alarm is as good as new. I couldn't see one labelled "aux" but the alarm is over 10 years old so I guess the newer ones may be different.
phil
May 2011
when you have the pirs open,try testing if you have any power at them,before you start opening the control panel,
gts
May 2011
Try opening the detector and making sure the wires have not come out of the unit (PIR). if they have connect them back up. Go to the panel and with a mulit meter test the glass fuses. The Auxillary fuse will be blown
Mark
May 2011
Sounds like you have blown the aux fuse its located in the control panel. Beware live mains voltage is present inside the panel and if you are unsure call out a pro
howtomendit.com for free repair help, information and advice.
