Recent: Safely remove screen protector from a Macbook Air?

Mend > Motorcycles

Mend Honda Lead 102 Metal Plate Top

Honda lead 102cc 2005?

took the metal plate off the top of the carburettor and the spring popped out.Thought I put it back ok but since then I have lost a lot of acceleration.

kevin
March 2011
Why because it wouldnt start..was gonna spray the carb. No expert(obviously)but its with a rubber diaphragm and underneath is a needle for the carb...its for taking in air and I presume I've upset the balance.I seem to put it back ok but no joy.

kevin
March 2011
1st, I would ask WHY!
Then, what else popped out with the spring??
The spring would have some part under pressure.

Sheepdog
March 2011

Automatic Answer

We may have found other answers which could help you.

Click here for Metal Plate Top

Related Questions ...

Mend dishwasher top motor
6

F2 error...Again?

Hi All, I have a 6603 F&P dishwasher. F2 error on top drawer came up so replaced the motor and set on a cycle... [Read more]
Mend electrolux premier cooker
1

DDO 6o GA Electrolux Premier cooker loose wire?

I have a DDO 6o GA Electrolux Premier cooker. I wanted to clean the oven and removed the removable metal plate... [Read more]
Mend bosch working inside
1

Bosch HBC84K550B Microwave not working?

Hi, My Bosch HBC84K550B goes off after 3 seconds. I removed the round glass plate on the inside top of the ov... [Read more]
Mend elements top power
3

"Shorted-out" burner elements on Electrolux stove top?

Power is good to the burner elements. Grounding wire up against metal bottom covering plate resulted in insul... [Read more]
Mend should oven door
2

Should there be a gap in my oven door seal ?

Hi, i have a diplomat softline adp0500 gas cooker and we are experiencing massive cooking times and cant se... [Read more]
Mend cistern pan close coupled
1

leak between cistern and pan (close coupled)?

wall mounted cistern, metal plate on top of rubber (donut)seal with 2 wingnuts onto pan no seal between this a... [Read more]
Mend flashing eco dishwasher described
2

Hotpoint DWM55 Error - Flashing Lights Eco and Fast?

My dishwasher recently gave me the flashing lights as described in the Title of this thread. I contacted Hotpo... [Read more]
Mend machine hello picked
2

Old Pfaff sewing machine blowing fuse/lights in house. Why?? Help?

Hello. I have a old Pfaff sewing machine that I picked up for cheap at a store. It is the kind with the built ... [Read more]
Mend power properly top
3

nrg power revs keep dropping 2 7000rpm and wont move properly?

i have a 2005 nrg power dd top speed down hill is 63mph tested against a gsxr 600 and have a laser x pro exhau... [Read more]
Mend pressure washer leak karcher
1

karcher k3.99?

hi my karcher is splling out water from the top of the unit either side of the metal plate. there doesn't seem... [Read more]
Mend leisure light hob
1

Faulty Leisure Mistral EL?

This is a manual light Gas Cooker, the hob is fine but the oven section has just stopped heating up. The gas c... [Read more]
Mend hello plugged light
9

Wiring on Singer 201-3?

Hello there, I've just picked up a 201-3 with a Sew-Tric motor/light and the problem i have is that - when... [Read more]
Mend cd player repair mechanism
2

CD mechanism jammed?

In removing a lost CD from the mechanism some of the plastic CD lifting parts as well as the top metal plate c... [Read more]
Mend cooker electric work
1

The switch for one of the plates of my cooker has come off?

Therfore the plate is always on. (It is an electric cooker) It has to be switched off from the mains. The ... [Read more]
Mend heating system boiler radiators
1

pilot light issues with 100yr old boiler?

Dont ask how, but my gas main got shut off... I have to relight every pilot light in the house to get the radi... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Motorcycles ...