Beko WMA642W washing machine ?

My beko starts it cycle then the wash and spin doesn't work

Chris
October 2013

SOLVED!!! for any one who has the same problem ive fixed it. I changed the brushes and cleaned out the drain pump. Neither were bad at all they both looked fine.

I then found that the adapter which connects the outlet pipe to the main sink drain was blocked up. I didnt pick it up first time as i only checked the pipe and that the water emptied from the washing machine empty pipe ok.

After removing the U bend i tested the machine and very little water emptied through the U bend under the sink, removed the machine pipe from the sink drain and put it in a bucket the water would pump out ok.
took all the sink wast pipes to bits and found the adapter was completely blocked. cleaned it all through as machine is working ok.

guess im lucky the machine cut out and the drain pump didnt burn out!!

simononestop
March 2011

Ive had more major troubles, got home tonight tried to start the machine and spin the clothes still in it too dry them. now all that happens is the machine spins the drum once then fills up a bit. nothing happens for ages although it sounds like its trying to empty? then it spins once starts to fill up again. Repeat!! I had to turn it off then open the door to umpty the water out with towels etc! other wise it would just keep filling up? why is it so screwed now. holding the cancel button does nothing? setting it to drain just repeats the same as above??

simononestop
March 2011

Yes, change the brushes (cheap and easy to do) and while you've got the machine in bits, clean any debris/stray coins/hairclips from the outlet pump. These two faults account for most wmc failures.

Vince
March 2011