2 hours ago: Mountfield sp454?

Mend > Home Alarm Systems

Mend Veritas R8 Plus Zone

Veritas R8 plus PIR problem?

I have just moved and reinstalled my Veritas R8 Plus. I have a zone with 2 PIRs wired in series. The walk test just shows an error i.e the zone is shown as open. Neither PIR has the red light showing. I have bought new PIRs in case it was the old ones that were faulty, and I have wired them to a new zone in case the old zone was faulty. It looks like power is not getting to the PIRs. The Aux fuse looks OK, and I have checked the wiring. Do I just have a faulty motherboard?

Clive Eames
March 2011
VeritasVeritas R8 PlusSecurity Systems, Home Alarm SystemsVeritas R8 Zone
zone and tamper circuits should be in series, aux power (12v & Ov) should be in parrallel.

thank me later
March 2011
"The Aux fuse looks OK"

LOOKS OK? Is this a new way of checking fuses?

Is it any better than doing it the correct way with a multimeter?
Still, I suppose it would save a trip up the road to the van to get the meter to do it properly.

Glad to see you've got plenty of money for new detectors that are not needed, still, you could sell them and put the money to a MULTIMETER, couldn't you?

acorn
March 2011

Automatic Answer

We may have found other answers which could help you.

Click here for Veritas R8 Zone

Related Questions ...

Mend alarm veritas r8
12

How can I fix my alarm veritas r8?

Hello . I have just installed a veritas r8 alarm , when I set the alarm the zone with the door contacts on lig... [Read more]
Mend veritas r8 plus alarm
1

How can I fix my Veritas R8 plus alarm?

How do I change zone 1 (hall) to exit/entry on part. At present omitted. Zone 1 (hall) exit/entry on full s... [Read more]
Mend initial power up working
5

initial power up on r8 not working?

i have just installed a veritas 8 with remote keypad on initial power up when battery is connected the keypads... [Read more]
Mend veritas r8 alarm
4

how can i fix my veritas r8 alarm?

since decorating when i moved 2 sensors my system will not set (all 6 zone leds are on), none of the sensors a... [Read more]
Mend help veritas tamper alarm
1

Help with Veritas R8, tamper light and zone 2(Hallway)?

Help with Veritas R8, tamper light and zone 2(Hallway)? Help with Veritas R8, tamper light and zone 2 Can no... [Read more]
Mend home alarm systems
1

home alarm systems?

hi how do i wire a pir and door contactor on the same zone on veritas r8? also how to install sound bomb? ... [Read more]
Mend control morning going
8

Veritas R8 Plus?

Hello, I have a Veritas R8 Plus with 1 LCD control pad. We were woken this morning by the alarm going off,... [Read more]
Mend problem turn lights fault
1

Whats it the problem with my veritas R8?

when i turn on the lights in the house the panel activates a tamper fault on zone 3 & 4. This isnt everytime b... [Read more]
Mend security system door
1

Veritas R8 wont set as saying zone 3 open but its not?

My veritas R8 panel is saying that zone 3 is open when I try to do a full set of the alarm even though the doo... [Read more]
Mend veritas alarm system power fault
1

veritas R8 - gone off, tamper light on, code not accepted......HELP!!!!?

Early this morning my veritas r8plus system went off after a power fault. Entered code, would not stop. Trie... [Read more]
Mend veritas security system home alarm
2

Veritas R8 Problems?

Already posted problem....try to set and Zone 8 lights up followed by 8 chimes and won't do anything else unle... [Read more]
Mend veritas r8 alarm
3

How can i fix my Veritas R8 Alarm?

I have changed battery in above alarm, how do i get my zone sensors to detect when alarm is set.( No red light... [Read more]
Mend veritas alarm zones
2

Veritas R8 alarm- zones 'in fault'? Continued?

I'm hoping to receive a response from Death, who answered my last question about my Veritas R8 alarm being in ... [Read more]
Mend veritas alarm zones
6

Veritas R8 alarm- zones 'in fault'?

Hi, I have moved into a house with a Veritas alarm (from their website it seems to be an R8 or R8 Plus- more p... [Read more]
Mend security system tamper
2

Help with Veritas R8, tamper light and zone 3?

Alarm went off for no reason while I was home, now there is a blue light flashing outside and on the control p... [Read more]
Mend veritas sensors red

How can I fix my Veritas 8?
Mend security system reset

Veritas c8?
Mend alarm panel user code

Veritas Alarm panel unable to set user code?
Mend security system battery

Veritas 8 alarm?
Mend veritas 8 system

pir detector walk test on a veritas 8 system?
Mend veritas alarm panel

The Unset flashes on my Veritas alarm panel?
Mend veritas unset light flashing reset

Veritas 8?
Mend veritas r8 press

Veritas r8 ?
Mend veritas 8 alarm

How can I fix my Veritas 8 Alarm ?
Mend security panel tamper

Second door contact?
Mend reset hello trouble

factory reset?
Mend veritas delay entry

delay entry time?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Other models...

Veritas 8Veritas 8 CompactVeritas 8CVeritas R8Veritas R8plusVeritas RS12Veritas RS200Veritas V1

Related Categories

Mend Car Alarm Systems
Car Alarm Systems

Topic

Veritas R8 Plus PIR Issue - Help!