Recent: Mountfield sp454?

Mend > Home Heating Systems

Mend Water Cylinder Way

my hot water cylinder tank has given way. How can I fix it?

My cylinder has given way and I want to replace with a new lagged one.
Can someone please advise me whether this is a relatively easy job as it seems to be or are there any complications involved that I should be looking out for?
Any advice would be gratefully appreciated.

Ramesh
February 2011

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Water Cylinder Way

Related Questions ...

Mend central heating hot water boiler
1

heating system?

I had a glow worm 24hxi boiler fitted to my existing y plan system using the original controls(programmer,room... [Read more]
Mend boiler heating waterflow
1

second pump system?

hav recently installed a wood burning boiler stove , the system with adition of 2 gate valves to route and con... [Read more]
Mend boiler heating valve
5

No hot water from Danesmoor bolier?

I have a boiler danesmoor 15/90 and now can not get hot water from taps. ..just cold running water. Have check... [Read more]
Mend system drained heating
1

boilermate refill probs?

hi have a boilermate with refill probs,the system was drained on arrival the pump on heating was said to be ru... [Read more]
Mend valve heating drayton
2

problem with mid position valve? ?

I hope someone can clarify if I have diagnosed the fault that I think Ive got. A few days ago the central h... [Read more]
Mend actuator heating valve
1

not going to mid position on valve?

when I replaced the actuator on the mid position valve and controler I found that I could get heating and i co... [Read more]
Mend boiler heating noise
1

Glow Worm Spacesaver bangs & crashes when starting?

I have a wall hung 65000 BTU balanced flue boiler in our kitchen, it came with the house 25 years ago (when ne... [Read more]
Mend radiators valve faulty
6

No heating - 3 port motorised mid-position valve?

I have a Tower Mid-Position Valve and although I can get hot water my heating will not come on when we switch ... [Read more]
Mend heating hot water programmer
1

Heating boiler through the programmer is on hot water ok no heating to rad?

Boiler operates in the hotwater mode, put the switch over to the heating,no heating,room stat on max, 3 port v... [Read more]
Mend hot water system immersion heater valve
2

how can i stop my indirect combination cylinder overflowing BS3198:1981?

Hi there, Help needed to fix overflow problem I have a McDonald Engineers Hot Water System. Spec: Indirect ... [Read more]
Mend boiler thermostat hot water
7

No water coming out of any hot taps?

Hi, There isnt any hot water coming out of any of our taps this morning. Yesterday I fitted a new mixer... [Read more]
Mend heating bit problem help
1

Which Way to Jump?

CENTRAL HEATING CALAMITY It may sound a bit dramatic, but I have a real problem and would welcome any help ... [Read more]
Mend hot water heating
1

Why is there hot water but no heating?

I have a glowworm micron 40ff boiler,when hot water is selected on programmer the boiler fires up,but before t... [Read more]
Mend boiler heating radiators
2

Glow worm ultimate 40ff ultrahot water!!!!!?

Hi, I have the above boiler with potterton ep3002 timer and potterton room stst with hot water cylinder stat ... [Read more]
Mend baxi system pump
1

baxi 100 he system fault?

boiler reaches temperature but but pump stops after aprox 2 minutes will not come back on as no water circulat... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Heating Systems ...