The basin tap in the bathroom is a loop single lever mono mixer tap which is 6 years old.The tap is not leaking but the lever has become rather stiff and creaky when operating.Is it possible to repair it without dismantling it, if so how does it come apart.The model reference which I have is,PH305 PH361
Thank you marcus the glamd nut was unbelievably tight I took it off sprayed some wd40 on the blue flange,put the nut back,a bit looser but I still get some noise,but it is a lot better'thankyou.
john board
January 2011
In the front you will find a plastic plug carefully remove it behind the plastic plug you will find a grub screw remove it and lift of the tap top it might be a little stiff so go gently with it after doing that you will see a gland nut undo this place a bit of wd 40 just a squirt.. Put the top back on and try moving it around and it should go away.. It should be ok good luck
marcus
January 2011
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
