My washing machines appears to work normally but it does not heat the water. I have cheked the element and thermostat with a tester and they both had continuity, but there was no mains power reaching the element. Does anyone know what the problem might be?
I have checked the heating wiring and removed and reinserted all the wiring connectors on the PCB. I couldn't see anything wrong. However, when I used the machine this morning on a 40C wash it appeared to heat the water during the first cycle (the door glass was hot), but subsequent fills were all cold again. I used it again on a 30C wash, but it was cold from the start again. Hmm. :O/
Mikko
January 2011
check wiring from heater to pcb for any breaks and check pcb
airkool at hotmail.co.uk
January 2011
Automatic Answer
We may have found other answers which could help you.