Recent: Will I need to replace my garden tap?

Mend > Vacuum Cleaners

Mend Dirt Devil Ultra Vision Turbo

dirt devil ultra vision turbo?

my vaccums beater bar won't turn and the motor is smoking. It looks like the black band on the beater bar is kind of melting and chipping away from the belt turning. I put on a new belt and cleaned the whole machine and let it cool down but the problem is still there. Could the motor be burning out?? It is almost 4-5 years old. Thanks Linda

linda
January 2011
remove the bottom plate to expose the brush & belt remove the brush out along with the end caps, now try to turn the caps on the brush spindle (probably stiff/solid) so pull off the cap clean off all the debris from around the shaft refit the cap, repeat this procedure on the opposite end this should a 100 % improvement on the brush now turning FREELY, refit the brush bar and the belt to machine

post a reply if this helps fix

wirecutterman
January 2011

Automatic Answer

We may have found other answers which could help you.

Click here for Dirt Vision Turbo

Related Questions ...

Mend devil vision turbo

replaced belt on my dirt devil ultra vision turbo and no suction?

replaced broken belt, cleaned up debris and still no suction.
Mend vacuum motor problem

How do I access the switch on a Dirt Devil Vision Turbo?

My Dirt Devil won't run. I believe it is a switch problem. I can open the back of the motor, but haven't figu... [Read more]
Mend vacuum cleaner suction filters

Dirt Devil Ultra Vision Turbo won't suck?

I've cleaned the filters, checked the hose, dumped the canister, and it won't pick up a piece of thread, much ... [Read more]
Mend hose dirt devil

How do I detach the lower hose?

I have a Dirt Devil Vision Turbo M087800 I need to get at the height adjustment guts and I can't get the cover... [Read more]
Mend vacuum cleaner clog

vision turbo quit running?

my dirt devil vision turbo stopes running after a hair clog is there a reset button or is it junk now
Mend handle release work

How can I fix the handle release on a dirt devil ultra vision turbo?

The Handle Release on our Dirt Devil Ultra Vision turbo doesn't work. We were vacuuming and a shoelace got cau... [Read more]
Mend replace spring adjustment

How can I fix/replace spring for height adjustment?

I have a Dirt Devil Vision Turbo vacuum cleaner, Model # M088300. The spring for the height adjustment fell of... [Read more]
Mend filter power find

Dirt Devil upright canister with HEPA filter is loosing suction power?

I can't find my vacuum paperwork to troubleshoot myself. I found a clog in the lower hose coming from the floo... [Read more]
Mend spin cleaned thoroughly

How to fix my Dirt Devil Vision Turbo Vacuum if the brush will not spin?

I took the bottom part off and cleaned the brush thoroughly and brush still does not spin. What can I do to f... [Read more]
Mend devil vision turbo

the belt broke ?

dirt devil ultra vision turbo belt broke, and i cannot tell how to put it back on, i did try but it is still n... [Read more]
Mend vacuum suction cleaning

How to fix a Dirt Devil Ultra Vision Turbo?

My vacuum suction is not working properly, it will not pull the dirt through the coil into the tray. How do I... [Read more]
Mend dirt devil ultra
1

dirt devil ultra vision turbo ?

I am looking for a parts diagram for a model 087300 upright vacuum. I lost a filter below the canister and I w... [Read more]
Mend filter thought stopped
2

my upright vacumm no suction?

I cleaned out the filter because I thought that is why it stopped picking up anything, but it was not that. Ho... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Vacuum Cleaners ...