Recent: Mountfield sp454?

Mend > Home Heating Systems

Mend Potterton EP 3000 Programmer Hot Water

Do I need a new programmer?

I have a potterton ep 3000 programmer. Having problems with my heating and hot water which I am sure is due to the programmer. It keeps clicking which makes heating/hot water switch off. I have to fiddle with the switches on the programmer on all sorts of combinations before heating/hot water comes back on a period of time before going off again. I assume I need a new programmer but can you still get an ep 3000?

Erica
January 2011
i very much doubt it but most programmers come with a compatability chart describing which wires go where a reasonably competent person should be able to fit one

brian
January 2011

Automatic Answer

We may have found other answers which could help you.

Click here for Programmer Potterton Hot Water

Related Questions ...

Mend heating boiler hot water
1

potterton ep2001?

'central heating' kicks in on all settings but the 'hot water' only settings fail to fire up boiler. Is it lik... [Read more]
Mend boiler controller central heating
2

potterton ep2002 programmer?

I have a potterton ep2002 programmer. The central heating controller comes on but does nor fire the boiler. Ca... [Read more]
Mend programmer potterton fault
1

Potterton EP2001 Central Heating Programmer Fault?

Programmer is in off position but Hot Water is being supplied to the tank. Only way to switch off hot water to... [Read more]
Mend programmer heating hot water
1

EP2002 programmer?

Hi, I recently replaced my old potterton controller for a new EP2002. I have recently noticed that when I just... [Read more]
Mend How to mend it?
1

Potterton PRT2/ EP2002 C/H always on (unless at temp)?

I have developed a fault on my Potterton EP2002 Programmer following short circuiting and blowing a fuse. The ... [Read more]
Mend boiler central heating programmer
2

Potterton Programmer not controlling stat?

I developed a fault on my Potterton system as a direct result of trying to change the in room stat (Potterton ... [Read more]
Mend light power select
2

potterton ep20001 programmer wont light hw?

my programmer will not light up the HW side of the display after a power out. If I select hw it switches the c... [Read more]
Mend central heating thermostat programmer
2

Boiler firing up when programmer says off, and themo down?

Hey, My programmer (potterton) has been set for my hot water and heating to come on for a few hours each m... [Read more]
Mend central heating radiators thermostat
2

Central heating confusion?

I seem to only get hot radiators while my boiler heats my hot water but as soon as that get to temprature even... [Read more]
Mend potterton boiler programmer
1

potterton ep2001?

the once option on the hot water no longer fires up the boiler, does this mean i need to replace the programme... [Read more]
Mend boiler central heating ignition
1

pilot light wont ignite when hot water switched on ?

I have a potterton suprima 50 L boiler. When programmer or boost used for hot water pilot light does't ignite ... [Read more]
Mend boiler heating fault
1

How can I get hot water? ?

I cannot get any hot water and whatever setting I put the Tempus 3 programmer on it does not fire up the boile... [Read more]
Mend programmer central heating potterton
1

potterton EP3000 programmer?

Just bought new home I need to know how to programme just the hot water to heat up without having central heat... [Read more]
Mend boiler heating hot water
6

Why can we only get heating when hot water on also now(Dual programer)?

We recently needed to replace head valve due to pump over run problem.(Boiler is Potterton Profile) On putting... [Read more]
Mend central heating hot water boiler
10

Potterton Promax 24HE - No Central Heating?

Since the weather turned colder a couple of weeks ago we have been unable to have heating without the hot wate... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Heating Systems ...