Recent: Windows 11, Dell 5450, JBL Bluetooth headphones?

Mend > Washing Machines

Mend Zanussi ZWD 12270w Start Machine Displays

Zanussi ZWD 12270wWont Start?

Machine displays Code Ed4.Changed dry heater to no avail. Machine doesnot start,door lock clicks twice then start light just flashes

tom chris
November 2010
main pcb faulty or the dryer pcb behind the main pcb faulty.Only thing I can say to you is disconnect all 4 wires from the dryer element (mark them so you know what goes where).now see if it will start up and work as a washer!.Last one I did that worked when wires where disconnected turned out to be the main control pcb BUT its not 100% proof just a personal issue I had with one!!!

ck
November 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Start Machine Displays

Related Questions ...

Mend washing machine error message repair
3

How can I mend my Siemens XLS 1600 washing machine please?

I have a Siemens XLS 1600 washing machine which has shown an error message beriet. I have tried to reset it wi... [Read more]
Mend washing press start
2

How can I fix Error Code E6 on my Defy washing machine?

After the wash setting and I press start, my defy machine keeps on drawing water and finally displays Error Co... [Read more]
Mend error aeg lavamat
1

E20 error code?

I have an AEG Lavamat Turbo 16850 Washer Dryer, which occasionally displays an E20 error. I have checked th... [Read more]
Mend washing machine locked display
2

door flashes on my hotpoint washing machine?

when washing door flashes on the display of my hotpoint aquarius washer. the machine stops and the door remain... [Read more]
Mend clicks start cycle
1

How do I fix the following?

Whirlpool mod gwh9150pwo clicks and will not start. I then have to push "end of cycle signal" wich displays ... [Read more]
Mend washing machine appliance error
1

lg intellowaher displays 'del'?

unable to start washing machine as 'delay' stops machine from starting. My machine has just been installed in ... [Read more]
Mend washing machine error code water
1

My Zanussi washing machine displays E10 through cycle?

My Zanussi washing machine (Jet Stream 1400 XC) is fine until it gets to 39 mins from the end of the cycle, wh... [Read more]
Mend washing machine error message hotpoint
1

washing machine won't work?

I have a hotpoint ultima washing machine that won't work. When start button is pressed some water goes into ... [Read more]
Mend washing machine error code zanussi
1

Zanussi Washing Machine displays an error code E30?

hi, my washing machine appears to try to start then stops and gives me an error code of E 30, any ideas? ji... [Read more]
Mend washing machine beko faulty
2

Beko WMA 657 just shows 2 minutes remaining and won't do anything?

I've just moved a Beko WMA 657 W washing machine from one house to another and it seems to have died. When... [Read more]
Mend How to mend it?
1

Zannusi Jetstream 1400, FJR 1454W, stuck on Pump Out cycle?

Zannusi Jetstream 1400, FJR1454W appears stuck on pump-out cycle. I load wash, set settings for Temperature, ... [Read more]
Mend washing machine error code bosch
8

Bosch Washing Machine error code "E"?

My Bosch Nexxt 5000 series washing machine displays an E. The door is locked and the washer won't start. I'v... [Read more]
Mend fault machine tripped
1

hotpoint aquarius WM72P fault?

Hi, machine gave electrical pop and tripped electrics when cycle started, when switched on again now displays ... [Read more]
Mend washing machine error code zanussi
29

Zanussi Washing Machine displays an error code E90?

My Zanussi Washing Machine displays an E90 error part way through the cycle. You can press start and the cycle... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...