Recent: Home max fs506x?

Mend > Lighting

Mend Blowing Blow Replaced

transformer keeps blowing?

hi
why would a transformer on a ceiling light blow after 1 hour and when replaced 3 hours

nori
November 2010
What are the affects of the transformer blowing

Dave Mac
January 2013
could be your transformer is the wrong one,check the power rating eg 100w,this is the max power of lamp you can use on it,or your lamps are the wrong voltage.

jed
November 2010
Just two possible reasons

Manufacturing fault - a weakness inside - but more likely...

Too much load placed on it - trying to draw more power (Watts) than the transformer is rated for - it gets warmer and warmer and a wire inside melts.

Transformers are very simple and very efficient devices with often just two coils of wire .

Peccavi
November 2010

Related Questions ...

Mend fuse works replaced
2

mains plug keeps blowing its fuse /what should the fuse be?

my dryer works for a while then the 5 amp fuse will blow and has to be replaced this happens roughly every few... [Read more]
Mend hotpoint fuses fuse
3

Hotpoint WT960p-Keeps blowing fuses?

Hi,When you try to turn on machine-it trips or blows a fuse? I tried various things-disconnecting the heater, ... [Read more]
Mend heater element replacing
1

Indesit washing machine still blowing electric have replaced heater element?

Why after replacing heater element does indesit washer still blow electrics
Mend ariston microgenus 24 boiler
2

Ariston microgenus HE 24 combi-boiler PCB 2A fuses keeps blowing out?

The boiler is about 2 years old and it has started blowing fuses. All was well until last week. The boiler did... [Read more]
Mend blowing causing blow
1

Thetford Cassette C2 is blowing 3 AMP Fuses?

My C2 keeps blowing 3 amp fuses. How do I determine what is causing the fuses to blow? Could it be the flasher... [Read more]
Mend boiler heating pcb board
2

glow worm 55f fuelsaver?

pcb board blowing 1 amp fuse,boiler was working fine then was moved location now blowing fuse ,which has been ... [Read more]
Mend fan replaced blown
1

heater fan keeps blowing on ldv convoy 2001?

I have replaced the fuse (15a) for the heater fan as it had blown. But when I switched the fan on, it blew aga... [Read more]
Mend fuse main board
1

How to diagnose Fisher Paykel GWL10 blowing its fuse?

I was able to take the main controller board out, and found that the 3A fuse was popped. So I soldered across... [Read more]
Mend dryer fuse plug
1

white knight 767 condenser dryer?

the fuse keeps blowing in plug when first run from cold took about twenty mins to blow replaced fuse and it bl... [Read more]
Mend 13a fuse blowing
1

13A Fuse Blowing?

I have a new Al-KO 3Kw Log Splitter which is supplied with a standard 13amp plug. When I first switch on, the ... [Read more]
Mend keeps blowing main
3

my triton ivory 2 keeps blowing the main shower fuse!?

3 years ago we replaced our bathroom suite and replaced the shower like for like but just recently the fuse ha... [Read more]
Mend combi boiler no power pcb
4

ferroli modena 80 e blowing fuses and no power to fan?

I have a 5 year old ferroli modena 80 e combi boiler and it recently stopped working. Checked the fuse on the ... [Read more]
Mend causing replaced heat
1

thermostats on Hotpoint TDC 60 keep blowing. What's causing this?

I have recently replaced the thermostats after my tumbledryer failed to heat. I replaced them thanks to this s... [Read more]
Mend How to mend it?
1

constant blowing of fuses?

I have a nissan serena 'L' and the front heater blowers keep fusing so while I have heating it does not blow i... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Lighting ...