Hopefully someone can advise. We have a Glow Worm Micron 60 FF boiler which is rather temperamental at present. The heating is set to come on at a set time each day (4-8) however I need to keep re-setting the Glow Worm for it to ignite and the heating to kick in.
After about 1 minute the lights on the Glow Worm go off and the heating goes off. I then press reset again and the same happens.
Has anyone had a similar problem or can advise what might be the problem?
The LED's come on and then go off. Sometimes by opening and shutting the flap on the front of the boiler it kicks the system back on.
Rob
November 2010
As you have failed to mention any sequence of the leds (therefore giving a clue as to the problem), I can only refer you to in installation manual, you may find your answer in the fault finding section
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.