I have a replacement hose for my karcher k2.94 pressure washer, but i cannot open the gun part of the lance to connect it.
There are 3 screws but approx. 8 rubber looking seals holding the two halves of the gun together. I cannot get these to open. How do i do it?
check that the hose is not held in by a U clip that is inserted into the gun body just above the hose entry. If it is you will see a circa 10x2mm rectangular plastic "plug which is the edge of the base of the U. Prise it out and the hose can then be pulled out of the gun.
Vlad
October 2010
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix general d.i.y.