okay then my 2000 reg Peugeot vivacity will not start :( i replaced ht lead its got new spark plug. and she still ent sparking. i had a look at the flywheel the thing with the fan bolted on it. and its as rusty as sh.t. is this the problem ?
I got her runnningg :) YAYY :) but the electric start is f..ed. so i had to repair the kickstart. this did the trick. but found it hard to kick overr ! took loads of kicks, the auto choke cable is broke soo thats probally whyy. but the biike has wrecked the new kickstart alreaddyy :/
michaelcook
October 2010
naa she ent running :/ im replacing the slator plate 2morra. see if that does the trick. cus theres a little red wire coming from the cdi that plugs into nuffing soo i got told that red wire is ment to plug into the slator plate. but the slator plate thats on it has not got the wire to connect onto this little red wire so i ordered a new one with the wire. Hopefully she should work becuase the bike now has a aci400 cdi the newer version without imobilliser so she should work cus theres no chipped key
michael cook
October 2010
a man is comming to loook at the bike saturday soo hopefully it will be fixed. if it dont get fixed i be back on here. :) i will notify yous if the bike is running
michaelcook
September 2010
adam i tried a different wiring loom with different cdi and she still wouldnt spark. ray i will tryy it :) Thankss
michaelcook
September 2010
no that wont stop it sparking but a knackered cdi unit will and they do go on these,its under the footboard on the right
adam bike doctor
September 2010
sounds like the problem ,take it off and clean with sandpaper.