i have moved a panel (9600) for a friend in a bid to factory reset it i removed the nvm chip and god knows why i removed the chip above too . they are now mixed up any idea how to know which is which and therefore which goes where ?
to reset back to factory defaults,remove all power from the panel,remove the nvm chip,(above the large ic)power up panel,battery first,then mains,refit the nvm,the panel will now load the factory default codes,re-prog the panel with all the installation settings
mm
September 2010
if you look at the nvm ,you will see a half moon shape at one end,you will see same mark on the socket on pcb,just match these,be careful,the pins bend very easy
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home alarm systems.