lost code?

Stan
Please note that code entry is only possible when a numbers is flashing in the seperate display. If the display continually shows "WAIT" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible. so leave turned on untouched until it resets itself. don't touch any button cause if you do the wait time starts from the begining.
YOUR CODE 1772 You must hold at end to store code.
Code Entry as Follows:

Switch Radio On - Display Shows
" CODE "
Press " ¬ " On The Stalk Control To Enter
" 0000 "
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
If the correct code number is now shown
Press And Hold " ¬ " Until A Beep Is Heard

hay88
September 2010

hi post the numbers/letters from below the main barcode
something like 7700xxxxxxtt123 or 8200xxxxtt123 or
the security code like Q123 or T0U123
can be found in a small box then i can help you

hay88
September 2010