I am encountering a tamper 200 fault. I thought it might be a keypad tamper so I linked this out but I still get the tamper fault but it is never in fault when I arrive. The panel is a castle meridian.
thank you for your reply. The system is individually tampered via resistors and the bell tamper lists it as sab tamper and the circuits as individual faults. It lists the fault as tamper 200 which I don't have the engineer manual to find out which fault this is or if it could be something else.
Martin
August 2010
it could be a cut cable,or a loose cover on a pir,or the bell box tamper,does your control panel not give you an indication?you could open the control panel and find the main tamper circuit,and loop it out,this will tell you if its the bell box,remember to switch off mains power before you open the panel
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home alarm systems.