Recent: Home max fs506x?

Mend > Blenders/Mixers

Mend Kenwood A701A Missing Stopped Working

What am I missing to fix my Kenwood Chef A701A?

My Kenwood Chef A701a recently stopped working when the Nylon/Plastic(?) Planetary gear disintegrated. I have obtained a new metal replacement but in trying to put it all together find that the hollowed steel shaft which fits through the centre of the P.G. and holds the various attachments in place simply drops back out. Clearly it needs some form of washer/circlip/e-clip or spring clip to hold it in position. Can anybody please advise what is needed and where it fits in the assembly.

Carol
August 2010
KenwoodKenwood A701AKitchen Appliances, Blenders/MixersMissing Stopped Working
usually there are felt washers inside the gear race that
the planetary gear runs round. The spring washers that
hold these pads in place are the same as the one that
goes round the round part at the top of the square driven shaft

mal
August 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Missing Stopped Working

Related Questions ...

Mend sewing machine gear repair
1

How do you fit a new gear to a Singer 427 sewing machine?

Hi The bobbin mechanism has stopped working and I have discovered that the lower of the two nylon gears (top ... [Read more]
Mend How to mend it?
1

How to fix the booting problem?

I have an old, assembled desk top loaded with win7 ultimate. It has got 80 GB hard disk and 1 GB RAM. Earlier ... [Read more]
Mend vw golf central locking key
1

Cental Locking - Golf?

I have a VW Golf 2005 registered. I've only had a month and the centeral locking on the drivers door has stopp... [Read more]
Mend problem fan tested
2

Ariston EuroCombi Odd Problem?

Everything was working relatively normally until the fan stopped working so I took it out and revived it. I r... [Read more]
Mend hello night side
3

how much would a new motor be for wiprs for my punto please?

Hello everyone I am looking for some advice last night my wipe on the drivers side just stopped working (the o... [Read more]
Mend stopped working access
1

Concealed cistern stopped working - how to access?

My loo won't flush but it's difficult to diagnose the problem as the cistern is concealed behind a tiled wall ... [Read more]
Mend heater 2001 car
2

how do I fix my Skoda Octavia heater ? ?

I have a 2001 Skoda Octavia Elegance 2.0 petrol car. The heater has stopped working suddenly. The fan works fi... [Read more]
Mend How to mend it?
1

How can I fix my GHD's?

My GHDs Model SS2 (Q03245), Date code MW051227, of which I have owned for a couple of years just stopped worki... [Read more]
Mend freeview signal channels
1

Technosonic lost channels?

My freeview box just stopped working last week, now after retune I am missing BBC channels, rest of channels h... [Read more]
Mend ring 2000 reg
1

How can I fix the horn slip ring contacts on my Fiat Ducato 2000 reg?

The horn on my 2000 Fiat Ducto has stopped working. The slip ring contacts under the steering wheel look to b... [Read more]
Mend laptop battery charging
1

Toshiba L10 battery problem?

Here's the story. My battery dosent charge. i leave it charging all night, un-plug swith on and... Nothing. ... [Read more]
Mend bernina zag not
1

Bernina 830zig zag not working?

My Bernina 830 (27 years old) has stopped working on the zig zag stitch. The ordinary straight stitch was miss... [Read more]
Mend security system home
1

How can I fix my Veritas8 home alarm system?

My alarm suddenly stopped working. It shows no power getting to control box. I have replaced fuse and checked ... [Read more]
Mend Vaillant Boiler Fault Code
2

my vaillant turboMax boiler is showing F 63 fault. model 828e lpg?

My boiler stopped working this morning and is showing fault F63 I am unable to locate fault code. I have tried... [Read more]
Mend boiler heating replacement
3

Worcestor 28cdi fan replacement?

Hi, My 28cdi boiler stopped working, and it turns out the cause was a sticking fan. It's been noisy for a w... [Read more]
Mend change replace drive

How to change small pulley on kenwood KM020?
Mend kenwood service manual

kenwood km201 service manual?
Mend knob speed kenwood chef

How can i get the knob back on?
Mend bowl hello normal

Oil leaking into bowl?
Mend kenwood base processor

Repair Kenwood?
Mend Kenwood Mixer Repair

Kenwood Chef KM001?
Mend mixer blender repair

Bang, smell and smoke?
Mend mixer Kenwood motor

kenwood chef km200 mixer?
Mend Kenwood Mixer Replacement

Help with Kenwood KM331?
Mend cover kenwood machine

Cover removal?
Mend Kenwood Chef Mixer Replacement

Replace Spigot on High Speed Outlet Cover on Kenwood Chef?
Mend Kitchen Appliances, Blenders/Mixers

How to re-enamel the casing?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Blenders/Mixers ...

Other models...

Kenwood 701AKenwood 901Kenwood A701Kenwood A702Kenwood A703CKenwood A707AKenwood A901Kenwood A901DKenwood A901EKenwood A907DKenwood ChefKenwood Chef 901Kenwood FP520Kenwood KM200Kenwood KM201Kenwood KM210Kenwood MajorKenwood PM900

Related Categories

Mend Breadmakers
Breadmakers
Mend Coffee Machines
Coffee Machines
Mend Cooker Hoods
Cooker Hoods
Mend Dishwashers
Dishwashers
Mend Electric Cookers
Electric Cookers
Mend Electric Kettles
Electric Kettles
Mend Food Processors
Food Processors
Mend Freezers
Freezers
Mend Fryers
Fryers
Mend Gas Cookers
Gas Cookers
Mend Juicers
Juicers
Mend Microwaves
Microwaves
Mend Refrigerators
Refrigerators
Mend Toasters
Toasters
Mend Waste Disposal Units
Waste Disposal Units

Topic

Kenwood Chef A701A Repair - Planetary Gear Issue