After wiggling the output wires on the circuit board and the lamp turned on and off, I resoldered the black output wire and the capacitor next to it. The unit now works good. Prior to this, I had to thump the lamp on the floor to get it to turn on. The solder joints are less than acceptable on this model.
Daryl
October 2015
There is a fuse on the circuit board. this may be blown. it is soldered in. I have been trying to find out where to find the replacement board with no luck.
john
December 2011
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix lighting.